![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/Bookbinding-1.png\")
—<\/p>\n
Making a Piano Hinge Binding<\/h2>\nWhat you\u2019ll need<\/h3>\n\n- At least five sheets of paper for the book and two pieces of thicker paper or card for the cover \u2013 you can use different colours to make patterns or a rainbow effect on the spine<\/li>\n
- Wooden skewers (or you can use anything of a similar shape such as pencils or twigs) \u2013 one fewer than the number of sheets of paper you\u2019re using<\/li>\n
- Scissors, or scalpel, ruler and cutting mat<\/li>\n
- Ruler and pencil<\/li>\n
- Glue and brush<\/li>\n
- Coloured threads and beads<\/li>\n<\/ol>\n
Instructions<\/h3>\n\n- Cut every piece of paper (including the cover) the same size. An extra 1cm is required for the spine if you\u2019re using standard wooden skewers.\u00a0 If you are using thicker pencils or twigs you will need to allow more paper to wrap around them (we made our binding 12 x 12cm, so the paper measured 12 x 25cm).<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-1-e1586353699575.png\")
<\/p>\n
\n- Take your first sheet of paper and fold it in half by wrapping it around a skewer. Use your finger to press the paper into the skewer to create an obvious crease.\u00a0 You will need to do this gently so as not to tear the paper. Then turn the paper and skewer over and crease the other side. Repeat with all your pieces of paper, including the cover paper.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-2-e1586353850478.png\")
<\/p>\n
\n- Draw on four equally spaced marks along the fold by dividing the width of your paper (x<\/em>) by 5. Try not to press down on the crease \u2013 you want it to remain rounded rather than flattened.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-3-e1586353915456.png\")
<\/p>\n
\n- Cut small triangles out at each mark. These triangles should go up to the crease but not beyond it.\u00a0 If the triangles are too large your skewers will fall out.\u00a0 Continue with all your sheets \u2013 ensure all the triangles are at the same place on all your pieces of paper.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-4-e1586354062569.png\")
<\/p>\n
\n- Once you\u2019ve cut all your pieces of paper, gently press all the odd tabs in one direction, and all the even tabs in the other.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-5-e1586354485202.png\")
<\/p>\n
\n- Put the cover paper to one side for later.<\/li>\n
- Take the first two pieces of paper and place them together, so that their tabs face in the same directions.\u00a0 Use a skewer to thread through the tabs, alternating the pieces of paper.\u00a0 The even tabs of one piece and the odd tabs of the other should be on the skewer.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-6-e1586354585380.png\")
<\/p>\n
\n- Continue this with all the folded paper.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-7-e1586354658392.png\")
<\/p>\n
\n- Then make the covers.<\/li>\n
- Take one of the cover pieces of paper and gently push the two even<\/strong> tabs into the inside of the folded paper.\u00a0 Apply glue to the inside of the fold to adhere the folded sheet together, trapping the two tabs.\u00a0 Do not glue all the way into the fold.\u00a0 Take the other piece and push in the <\/span>three odd<\/strong> tabs and glue the folded sheet together.\u00a0 Allow the glue to dry.<\/span><\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-8-e1586354788734.png\")
<\/p>\n
<\/p>\n
\n- The two cover pieces should look like this:
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-9-e1586354953132.png\")
<\/li>\n - Use two skewers to attach the front and back covers by threading them into the remaining gaps.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-10-e1586355146744.png\")
<\/p>\n
\n- Knot a length of thread to one of the outer skewers and weave between the skewers at each end of the paper. This secures the paper and stops the skewers falling out.\u00a0 Beads can be added to the thread for extra decoration.<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/piano-11-e1586355205416.png\")
<\/p>\n
Hopefully, if you’ve managed to follow along, your binding should look something like this:<\/p>\n
![\"\"](\"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/files\/2020\/04\/Piano-Hinge-Binding-scaled.jpg\")
<\/p>\n
—<\/p>\n
We would love to see you efforts – send them to us on Twitter – @DorsetArchives<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"Whilst the Coronavirus lockdown continues, we have asked our Conservator for some bookbinding activities you can try at home. This is the third of three blogs in which she will show you how to do some book-binding at home… — A part of my job that I always look forward to is running bookbinding sessions.\u00a0… Read more Bookbinding DIY – Piano hinge binding<\/span><\/a><\/span><\/p>\n","protected":false},"author":1892,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[31,36],"tags":[82,157,9,159],"jetpack_featured_media_url":"","_links":{"self":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts\/1423"}],"collection":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/users\/1892"}],"replies":[{"embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/comments?post=1423"}],"version-history":[{"count":3,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts\/1423\/revisions"}],"predecessor-version":[{"id":1438,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts\/1423\/revisions\/1438"}],"wp:attachment":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/media?parent=1423"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/categories?post=1423"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/tags?post=1423"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- \n
- At least five sheets of paper for the book and two pieces of thicker paper or card for the cover \u2013 you can use different colours to make patterns or a rainbow effect on the spine<\/li>\n
- Wooden skewers (or you can use anything of a similar shape such as pencils or twigs) \u2013 one fewer than the number of sheets of paper you\u2019re using<\/li>\n
- Scissors, or scalpel, ruler and cutting mat<\/li>\n
- Ruler and pencil<\/li>\n
- Glue and brush<\/li>\n
- Coloured threads and beads<\/li>\n<\/ol>\n
Instructions<\/h3>\n
- \n
- Cut every piece of paper (including the cover) the same size. An extra 1cm is required for the spine if you\u2019re using standard wooden skewers.\u00a0 If you are using thicker pencils or twigs you will need to allow more paper to wrap around them (we made our binding 12 x 12cm, so the paper measured 12 x 25cm).<\/li>\n<\/ul>\n<\/p>\n
- \n
- Take your first sheet of paper and fold it in half by wrapping it around a skewer. Use your finger to press the paper into the skewer to create an obvious crease.\u00a0 You will need to do this gently so as not to tear the paper. Then turn the paper and skewer over and crease the other side. Repeat with all your pieces of paper, including the cover paper.<\/li>\n<\/ul>\n<\/p>\n
- \n
- Draw on four equally spaced marks along the fold by dividing the width of your paper (x<\/em>) by 5. Try not to press down on the crease \u2013 you want it to remain rounded rather than flattened.<\/li>\n<\/ul>\n<\/p>\n
- \n
- Cut small triangles out at each mark. These triangles should go up to the crease but not beyond it.\u00a0 If the triangles are too large your skewers will fall out.\u00a0 Continue with all your sheets \u2013 ensure all the triangles are at the same place on all your pieces of paper.<\/li>\n<\/ul>\n<\/p>\n
- \n
- Once you\u2019ve cut all your pieces of paper, gently press all the odd tabs in one direction, and all the even tabs in the other.<\/li>\n<\/ul>\n<\/p>\n
- \n
- Put the cover paper to one side for later.<\/li>\n
- Take the first two pieces of paper and place them together, so that their tabs face in the same directions.\u00a0 Use a skewer to thread through the tabs, alternating the pieces of paper.\u00a0 The even tabs of one piece and the odd tabs of the other should be on the skewer.<\/li>\n<\/ul>\n<\/p>\n
- \n
- Continue this with all the folded paper.<\/li>\n<\/ul>\n<\/p>\n
- \n
- Then make the covers.<\/li>\n
- Take one of the cover pieces of paper and gently push the two even<\/strong> tabs into the inside of the folded paper.\u00a0 Apply glue to the inside of the fold to adhere the folded sheet together, trapping the two tabs.\u00a0 Do not glue all the way into the fold.\u00a0 Take the other piece and push in the <\/span>three odd<\/strong> tabs and glue the folded sheet together.\u00a0 Allow the glue to dry.<\/span><\/li>\n<\/ul>\n<\/p>\n
<\/p>\n
- \n
- The two cover pieces should look like this:<\/li>\n
- Use two skewers to attach the front and back covers by threading them into the remaining gaps.<\/li>\n<\/ul>\n<\/p>\n
- \n
- Knot a length of thread to one of the outer skewers and weave between the skewers at each end of the paper. This secures the paper and stops the skewers falling out.\u00a0 Beads can be added to the thread for extra decoration.<\/li>\n<\/ul>\n<\/p>\n
Hopefully, if you’ve managed to follow along, your binding should look something like this:<\/p>\n
<\/p>\n—<\/p>\n
We would love to see you efforts – send them to us on Twitter – @DorsetArchives<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"
Whilst the Coronavirus lockdown continues, we have asked our Conservator for some bookbinding activities you can try at home. This is the third of three blogs in which she will show you how to do some book-binding at home… — A part of my job that I always look forward to is running bookbinding sessions.\u00a0… Read more Bookbinding DIY – Piano hinge binding<\/span><\/a><\/span><\/p>\n","protected":false},"author":1892,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[31,36],"tags":[82,157,9,159],"jetpack_featured_media_url":"","_links":{"self":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts\/1423"}],"collection":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/users\/1892"}],"replies":[{"embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/comments?post=1423"}],"version-history":[{"count":3,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts\/1423\/revisions"}],"predecessor-version":[{"id":1438,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/posts\/1423\/revisions\/1438"}],"wp:attachment":[{"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/media?parent=1423"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/categories?post=1423"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/news.dorsetcouncil.gov.uk\/dorset-history-centre-blog\/wp-json\/wp\/v2\/tags?post=1423"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- Knot a length of thread to one of the outer skewers and weave between the skewers at each end of the paper. This secures the paper and stops the skewers falling out.\u00a0 Beads can be added to the thread for extra decoration.<\/li>\n<\/ul>\n
- The two cover pieces should look like this:
- Continue this with all the folded paper.<\/li>\n<\/ul>\n
- Once you\u2019ve cut all your pieces of paper, gently press all the odd tabs in one direction, and all the even tabs in the other.<\/li>\n<\/ul>\n
- Cut small triangles out at each mark. These triangles should go up to the crease but not beyond it.\u00a0 If the triangles are too large your skewers will fall out.\u00a0 Continue with all your sheets \u2013 ensure all the triangles are at the same place on all your pieces of paper.<\/li>\n<\/ul>\n
- Draw on four equally spaced marks along the fold by dividing the width of your paper (x<\/em>) by 5. Try not to press down on the crease \u2013 you want it to remain rounded rather than flattened.<\/li>\n<\/ul>\n
- Take your first sheet of paper and fold it in half by wrapping it around a skewer. Use your finger to press the paper into the skewer to create an obvious crease.\u00a0 You will need to do this gently so as not to tear the paper. Then turn the paper and skewer over and crease the other side. Repeat with all your pieces of paper, including the cover paper.<\/li>\n<\/ul>\n
- Cut every piece of paper (including the cover) the same size. An extra 1cm is required for the spine if you\u2019re using standard wooden skewers.\u00a0 If you are using thicker pencils or twigs you will need to allow more paper to wrap around them (we made our binding 12 x 12cm, so the paper measured 12 x 25cm).<\/li>\n<\/ul>\n